Autodesk Fusion 360

Questions and Answers

• How can you edit a feature?
  1. Select the feature, press Delete, and then create a new feature.
  2. Right-click the feature and select Edit Feature.
  3. Keep clicking Undo until the feature is gone.
  4. Find the feature in the browser, select Remove, and then create a new feature.
• Which tool creates a plane normal to a sketch path or edge?
  1. Plane Through Two Edges
  2. Plane Along Path
  3. Plane at Angle
  4. Plane Through Three Points
• Which tool measures the precise distance between two points, and creates dimensions that are parallel to the locations of objects?
  1. Aligned Dimension
  2. Linear Dimension
  3. Angular Dimension
  4. Ordinate Dimension
• In simulation, which constraint prevents movement in a specific direction?
  1. frictionless
  2. prescribed displacement
  3. pin
  4. fixed
• In the CAM workspace, which strategy removes a part's interior cavity?
  1. Slot
  2. 2D Pocket
  3. Bore
  4. 2D Contour
• What does the Zebra Analysis tool do?
  1. It applies a metal render.
  2. It fixes bodies.
  3. It checks a body's continuity.
  4. It splits bodies apart.
• Which command creates a plane at the midpoint between two faces or work planes?
  1. Midplane
  2. Plane Tangent to Face at Point
  3. Offset Plane
  4. Plane at Angle
• Which hole type automatically enters a diameter value based on the type of fastener it will accomodate?
  1. Clearance
  2. Simple
  3. Drilled
  4. Through
• Which workspace creates components made from thin, premade material formed into specific shapes?
  1. Mesh
  2. Simulation
  3. Animation
  4. Sheet Metal
• What is required to invite other people into your project folder?
  1. a name
  2. an email address
  3. an IP address
  4. a phone number
• Which tool connects two joints in a way that the motion of one joint can drive the motion of another joint?
  1. Drive Joints
  2. As-built Joint
  3. Motion Study
  4. Motion Link
• Which joint type allows components to translate along two axes and rotate around a single axis?
  1. slider
  2. revolute
  3. planar
  4. pin-slot
• Which view shows a drawing part at an enlarged scale?
  1. detail view
  2. section view
  3. base view
  4. projected view
• Which file type is not a drawing output?
  1. DWG file
  2. CSV file
  3. STEP file
  4. PDF file
• What command do you use to understand the relationship between multiple joints?
  1. Lock
  2. Animate Joint
  3. Animate Model
  4. Motion Link
• What translator converts the screen toolpath into language the CNC machine understands?
  1. a post processor
  2. G-code
  3. NC-code
  4. a code processor
• Which pattern tool copies objects around a selected axis?
  1. Rectangular Pattern
  2. Pattern on Path
  3. Mirror Plane
  4. Circular Pattern
• What is the initial view placed in a drawing called?
  1. base view
  2. detail view
  3. section view
  4. main view
• Which command performs Boolean operations between solid bodies?
  1. Draft
  2. Press
  3. Pull
  4. [X] Combine
• In the CAM workspace, which strategy removes a part's interior cavity?
  1. 2D Contour
  2. 2D Pocket
  3. Slot
  4. Bore
• What does the Zebra Analysis tool do?
  1. [X] It checks a body's continuity.
  2. It splits bodies apart.
  3. It fixes bodies.
  4. It applies a metal render.
• You want to set up studies to test your design and see how it performs under various loads and conditions. Which workspace do you use?
  1. Animation
  2. Mesh
  3. [X] Simulation
  4. Render
• Which type of fillet applies two or more radius values to a selected edge?
  1. G2
  2. [X] Variable Radius
  3. Chord Length
  4. Smooth
• Which tool analyzes a T-spline body and corrects it?
  1. Repair Body
  2. Convert
  3. Enable Better Performance
  4. Make Uniform
• Which pattern tool creates copies of objects in one or two directions?
  1. Pattern on Path
  2. Mirror Plane
  3. Rectangular Pattern
  4. Circular Pattern
• Which command shows the movement of the joint only, and does not take into account other grounded joints or any external effects on the joint?
  1. Suppress
  2. Animate Model
  3. Drive Joints
  4. Animate Joint
• How many sketches are required to create this object?
  1. [X] two
  2. three
  3. none
  4. one